
AI CCTV analytics for UK hotels alerts from the cameras you already have
From London boutique hotels to serviced apartments in Manchester and guesthouses in Edinburgh, CamAI turns existing CCTV into alerts for back-of-house doors, kitchens, reception queues and car parks, set up by our UK team.
- 02:18Clip
Person on roof after hours
CAM 12Built-in
- 15:04Clip
Queue at reception over 5
CAM 01Built-in
- 23:51Clip
Smoke · laundry
CAM 07Built-in

The cameras are there. The problem is what nobody sees.
The problem, in one line
The night team cannot watch every service door, roof and store on the screens.
Back-of-house is quiet for hours
Reception queues build at check-in time
The car park runs on guesswork
Rules that fit how your site runs.
Built-in
Entry to back-of-house, stores or roof after hours
Smoke or fire in laundry, kitchen and stores
Queue at reception too long
Vehicle at a gate not on the allow-list
Car park occupancy and overstays
Custom, tested in a pilot
Reception desk left unstaffed
Staff uniform in guest areas
Custom rules are built and tested on your own footage before go-live.
Book a site visitInside this sector. What CamAI can flag at each kind of site.
Built-in rules start on day one; anything marked custom is built and tested on your own footage in the pilot.
Hotels
Reception queues, back-of-house and roofs after hours, smoke in laundries and kitchens.
Serviced apartments
Plates at the gate with an allow-list, car park use, roofs and pools after hours.
Travel & tourism offices
Counter queues, visitors by hour and entry after closing.
Your video stays at your site
Usually analysed on a server at your premises. Camera video stays in the UK. CamAI does not identify anyone.
Privacy and your dataStart with one site
A pilot on your own cameras and footage, so you see real alerts before you decide. Pricing is by quote.
How the pilot worksHotel and hospitality camera alerts in the UK
A hotel has far more doors, corridors and plant areas than it has people to watch them.
How UK hotels and hospitality businesses can use CamAI
A hotel has far more doors, corridors and plant areas than it has people to watch them. CamAI reads your existing IP camera feeds and sends the duty manager a short alert, with a clip, when something on your list happens. It is a FRESME product, installed and supported in the UK by our own team.
What UK hotel buyers look for
People usually search for phrases such as "CCTV analytics for hotels", "AI CCTV for serviced apartments" or "smart cameras for a hotel car park". Behind those searches sit practical worries: a fire door propped open, someone reaching the roof at night, a queue at check-in on a busy Friday. CamAI is built around exactly those situations and does not try to be a general-purpose security product.
Back-of-house, kitchens and stores
Alerts can flag entry to stores, plant rooms, roofs and service corridors outside the hours you set, and loitering near service doors. Smoke alerts cover kitchens, laundry and linen stores as an extra early warning alongside your fire alarm, never instead of it. A rule for staff uniform in guest areas can be built as a custom rule and tested on your own footage first.
Front of house and car park
Queue alerts tell the front-desk team when the check-in line is getting long, and a custom rule can flag a reception desk left unstaffed. Lobby and restaurant footfall by hour helps you plan rotas. In the car park, plate reading with allow-lists logs vehicles at gates and service entrances, and occupancy figures show free spaces and overstays.
Privacy and how a pilot starts
Video is analysed on a server at your premises, where it is recorded, and CamAI does not identify people. It only works on cameras you already have in public and back-of-house areas. We begin with a site visit from our UK team, then a pilot on a few cameras, and a written proposal follows once you have seen the alerts for yourself.
A city-centre hotel in London
A hotel near King's Cross wants to know when anyone enters the plant room or roof access between midnight and six, and wants a smoke alert from the kitchen store. The night manager would receive the clip on their phone instead of reviewing recordings in the morning.
Serviced apartments in Manchester
An operator with several serviced apartment buildings wants plate reading at the underground car park gate with an allow-list for guests and staff. Unknown plates and out-of-hours arrivals would raise an alert, and every entry would be logged with a clip.
A conference hotel in Birmingham
A hotel hosting events wants a queue alert for the reception desk and hourly counts through the lobby on conference days. With those numbers the front-of-house manager can decide how many people to put on the desk for the next event.
Questions from UK hotels and hospitality businesses
Can CamAI work with the CCTV already installed in our hotel?
In most cases, yes. If your cameras are IP cameras that stream over RTSP or ONVIF, CamAI can read them without replacing the recorder. Our UK team checks the cameras during the site visit and tells you which positions work well and which might need adjusting.
Does CamAI replace our fire alarm?
No. Smoke and fire alerts are an extra early warning from the camera feeds, sent alongside your fire alarm and never instead of it. Your existing fire safety arrangements stay exactly as they are.
Which hotel alerts are built in and which are custom?
Entry to restricted areas outside set hours, smoke alerts, queue alerts, loitering and plate reading with allow-lists are built in. Rules such as staff uniform in guest areas or a reception desk left unstaffed are custom rules, built and tested on your own footage during the pilot.
What about guest privacy?
CamAI does not identify guests or staff, and it only uses cameras in areas that already have them, such as entrances, lobbies, corridors, stores and car parks. Video is analysed on a server at your premises, so it stays where it is recorded.
Can we run it across several hotels?
Yes. Each property has its own cameras and rules, and the dashboard lets head office compare footfall, alerts and car park use between sites. Our UK team plans the rollout property by property.
How do we start and what does it cost?
It starts with a site visit, then a pilot on a few of your own cameras, then a written proposal. There is no price list, because cost depends on the number of cameras, the rules and the number of properties, and we quote per site after the pilot.
Cover the back-of-house too.
Book a site visit. We look at your hotel cameras and plan a pilot on the areas that matter most.
What happens next
- 1Our team contacts you to arrange a visit to your site.
- 2We look at your cameras and agree the rules with your team.
- 3A pilot on a few of your cameras, then a written proposal.