CamAI

AI CCTV for UK residential blocks managed buildings, build-to-rent and co-working

CamAI gives managing agents and landlords in London, Manchester and Birmingham alerts from existing CCTV on car park use, unknown vehicles, roof and plant room entry and loitering at entrances.

Sectors

AlertsResidential compound · sample
  1. 23:12

    Unknown plate at gate 2

    CAM 01Built-in

    Clip
  2. 02:37

    Person at perimeter wall

    CAM 14Built-in

    Clip
  3. 19:05

    Visitor bay over time limit

    CAM 06Built-in

    Clip
Example · sample times and events
CCTV cameras mounted on a building wall

The cameras are there. The problem is what nobody sees.

The problem, in one line

The guard at the gate cannot check every plate and watch every wall at the same time.

  1. Gate logs are kept by hand

  2. Parking is always the first complaint

  3. Walls, roofs and plant rooms are quiet at night

Rules that fit how your site runs.

Built-in

  • Vehicle at the gate not on the resident or visitor list

  • Perimeter intrusion at night

  • Entry to roofs, plant rooms or pools after hours

  • Parking occupancy and overstays

  • Smoke in car parks, bin rooms and plant rooms

Custom, tested in a pilot

  • Co-working: occupancy by zone, reception left unstaffed

Custom rules are built and tested on your own footage before go-live.

Book a site visit

Inside this sector. What CamAI can flag at each kind of site.

Built-in rules start on day one; anything marked custom is built and tested on your own footage in the pilot.

Residential and managed building camera alerts in the UK

A residential block has many shared spaces and few staff on site.

How UK property managers can use CamAI

A residential block has many shared spaces and few staff on site. CamAI reads the cameras you already have and sends the building manager a short alert, with a clip, when one of your rules is broken. It reads number plates, but it does not identify residents.

  • What UK property managers search for

    Search terms include "CCTV analytics for residential blocks", "ANPR for car parks" and "AI cameras for build-to-rent buildings". The concerns are familiar: unknown vehicles in resident bays, visitors overstaying, and doors to the roof or plant room being used when they should not be.

  • Gates, car parks and visitor bays

    Plate reading at gates and car park entrances keeps an allow-list for residents and visitors and flags unknown vehicles. Occupancy figures show free and taken spaces, busy hours and overstays in visitor bays, so managing agents can see how the car park is really used.

  • Perimeter, roofs and plant rooms

    Alerts can flag perimeter intrusion at night, entry to roofs, plant rooms and the pool area outside set hours, and loitering at entrances. Smoke alerts cover car parks, bin rooms and plant rooms as an extra early warning beside the fire alarm, never in place of it.

  • Co-working spaces and privacy

    Co-working operators can add occupancy by zone and hour, and a custom rule for a reception desk left unstaffed. CamAI does not identify residents or members; only plates are read. Video is analysed on a server on site, and our UK team starts with a visit and a pilot.

  1. A build-to-rent block in Manchester

    A build-to-rent operator wants plate reading at the car park entrance with an allow-list for residents and a separate one for visitors. Unknown plates and overstays in visitor bays would raise an alert to the building manager.

  2. A managed building in London

    A managing agent responsible for several blocks wants an alert whenever the roof access or plant room door is opened outside contractor hours. Smoke alerts in the bin store would be added from the same cameras.

  3. A co-working space in Birmingham

    A co-working operator wants hourly occupancy by floor and an alert when reception has been left unstaffed during opening hours. The figures would show which floors are busiest across the week.

Questions from UK property managers

Does CamAI identify residents?

No. CamAI reads number plates against the allow-lists you set, but it does not identify residents, visitors or members. Alerts describe events such as an unknown vehicle or a roof door opened after hours.

Can it work with the CCTV already in our block?

In most cases, yes, if the cameras are IP cameras that stream over RTSP or ONVIF. Our UK team checks them on the site visit and says which positions suit plate reading and which suit zone rules.

How do resident and visitor allow-lists work?

You keep a list of plates per gate or car park, with separate lists for residents and visitors. A plate that is not on the list, or arrives out of hours, raises an alert, and each entry is logged with the time and a clip.

Which rules are custom?

A co-working reception left unstaffed is a custom rule, built and tested on your footage. Plate reading, parking occupancy, perimeter and after-hours entry alerts, smoke alerts and loitering are built in.

Can one dashboard cover several buildings?

Yes. Each building has its own cameras and rules, and the dashboard lets a managing agent compare alerts and car park use across all of them.

How do we start, and how is it priced?

We begin with a site visit, then a pilot on a few cameras, then a written proposal. There is no price list; each site is quoted after the pilot.

Every gate logged, every wall watched.

Book a site visit. We look at your gates, car parks and perimeter and plan a pilot.

What happens next

  1. 1Our team contacts you to arrange a visit to your site.
  2. 2We look at your cameras and agree the rules with your team.
  3. 3A pilot on a few of your cameras, then a written proposal.

Prefer WhatsApp? Chat with us

For example: helmets in the warehouse, smoke at night, queues at the tills.

We use these details only to arrange your site visit and pilot.

Book a site visit