
CamAI use cases in the UK what your CCTV can flag
From smoke in a closed warehouse to a missing hairnet on a prep line, these are the jobs UK businesses give CamAI on the IP cameras they already own, each one set up and tested on site by our UK team.
From what you need to a running rule.
You tell us. Our team sets it up.
01 · You
Tell us what to catch
In plain words, like you would tell a supervisor.
02 · We
We set the rule
Cameras, zones, hours and who gets the alert.
03 · CamAI
CamAI watches
Every feed, around the clock.
04 · Your team
You get the alert
With the clip, on the app or WhatsApp.
Use cases by team. The question each team brings.
Choose your team.
Owners & managers
One view across every branch.
Compare branches
Built-in“Show me which branch gets the most visitors, and when.”
- The problem
- Every branch reports differently, if at all. You can’t tell a quiet store from a badly run one.
- With CamAI
- Visitors in and out by hour, busy times and queues for every branch, in one dashboard and a report that arrives on schedule.
After-hours entry
Built-in“Tell me if anyone is inside a branch after closing.”
- The problem
- Once the shutters are down nobody watches the screens. Problems are found the next morning.
- With CamAI
- An alert with the clip when someone enters a zone during hours you mark as closed, at any branch.
Operations
Run the floor while it is happening.
Keep queues short
Built-in“Alert me when the checkout queue gets too long.”
- The problem
- Customers leave long queues quietly. By the time someone notices, the sale is gone.
- With CamAI
- An alert to supervisors when a queue passes the length you set, so another till opens in time.
Unattended counter
Custom, tested in a pilot“Tell me when a service counter is left without staff.”
- The problem
- You hear about an empty counter from a customer complaint, not from your own team.
- With CamAI
- An alert when a counter stays empty longer than you allow, with the clip for the supervisor.
Health & safety (HSE)
Safety rules, kept on every shift.
PPE on the floor
Built-in“Tell me when someone is on the floor without a helmet or vest.”
- The problem
- A supervisor can’t be in every aisle on every shift, and missed PPE is only noticed when it is too late.
- With CamAI
- Helmet and high-visibility vest checks in the zones where they are required, with the clip to coach from.
Restricted zones
Built-in“Alert me if anyone walks into the machinery area.”
- The problem
- Danger zones are marked on the floor, but nobody sees when someone crosses the line.
- With CamAI
- Draw a zone or a line on the camera and get an alert the moment it is crossed, during the hours you set.
Security
Know the moment it happens, with the clip.
Intrusion and restricted zones
Built-in“Tell me when someone enters the stockroom after closing.”
- The problem
- Guards can’t watch every screen, and recorded footage is only checked after the damage.
- With CamAI
- Alerts for restricted zones and after-hours entry, with the camera, the time and a saved clip.
Suspicious loitering
Built-in“Flag anyone hanging around the high-value shelves.”
- The problem
- Unusual time spent near high-value shelves or doors goes unseen until it is too late to check.
- With CamAI
- Loitering alerts near the shelves and doors you choose, so staff can check while it is happening.
Quality & hygiene
The standard, held when it is busy.
Hairnets at prep stations
Custom, tested in a pilot“Tell me when someone preps food without a hairnet.”
- The problem
- The rule is clear, but it slips at rush hour, and nobody sees it until an inspection.
- With CamAI
- A hairnet check on the prep-line cameras, alerting the supervisor with the clip.
Gloves on the line
Custom, tested in a pilot“Alert me when gloves are not worn at the line.”
- The problem
- Glove rules are hard to check across shifts and stations without standing over people.
- With CamAI
- A glove check at the stations you mark, tested on your own footage before go-live.
Marketing & store layout
See how people really use your space.
Footfall by campaign
Built-in“How many people came in during the campaign?”
- The problem
- Campaigns are judged on sales alone, with no idea how many people they actually brought in.
- With CamAI
- People counting at every entrance by hour and day, to compare before, during and after a campaign.
Heatmaps and dwell
Built-in“Where do visitors stop, and which displays do they ignore?”
- The problem
- Layouts change on instinct. Dead corners and ignored displays stay that way.
- With CamAI
- Heatmaps and dwell time per zone, before and after you move a display.
Your team’s use case isn’t listed?
If it can be seen on camera, we can usually build it as a custom rule.
Book a site visitWhat UK businesses ask CamAI to watch for
A use case is simply one question you want your cameras to answer without someone sitting in front of the screens all day.
UK use cases in practice
A use case is simply one question you want your cameras to answer without someone sitting in front of the screens all day. Below are the questions we hear most often from businesses in the United Kingdom, grouped by the kind of job they do, with notes on how each one is set up, tested and handed over.
Early warning when nobody is there
The most common request from UK warehouses, factories, kitchens and shopping centres is cover for the hours when the site is closed. CamAI looks for smoke and flames, people entering restricted zones and anyone on the premises after the hours you set. Rather than learning about a problem when the first shift arrives, the key holder or on-call manager receives an alert with a short clip and can check the situation straight away. Schedules can differ for weekdays, weekends and bank holidays.
Keeping safety kit on in the right places
Health and safety leads on UK sites ask CamAI to check helmets and hi-vis vests in the zones where they are required, such as docks, racking aisles and production halls. Restricted-zone alerts cover forklift-only routes and areas near machinery. Because each alert comes with a clip, the supervisor can deal with it on the spot or raise it at the next briefing, and the weekly report shows which areas and shifts need more attention over time.
Hygiene and site-specific rules
Many of the most useful rules are specific to one business. A central kitchen might want hairnets and gloves on the prep line, a restaurant might want to know when a counter is left unattended, and an entertainment centre might want wristband checks or alerts for crowding at a ride. These are built as custom rules and tested on your own footage during the pilot, so you see how each performs on your cameras before you agree to roll it out.
Understanding visitors and queues
UK retailers, shopping centres, restaurants and leisure venues use CamAI to count visitors by hour and day, see heatmaps of where people go, measure dwell time in chosen zones and get alerts when a queue grows too long. Where switched on, anonymous aggregate age and gender estimates add another layer. The branch comparison lines up every location in one view, and scheduled reports send the figures to the managers who plan rotas and layouts. No visitor data has to be gathered by hand at the door.
How each use case is set up here
Every use case follows the same path in the UK. Our UK team visits your site and looks at the cameras, network and areas you are concerned about. A pilot then runs on a few of your own IP cameras, with the server usually installed on your premises so the video is analysed where it is recorded. You see real alerts in the dashboard and app. Only then do you receive a written proposal, quoted per site, covering scope, timeline and cost.
Smoke near a charging area at night
You manage a UK warehouse where forklifts charge overnight in one corner of the building. Nobody is on site between shifts. You want the duty manager to get a WhatsApp alert with a clip if smoke appears near the chargers, and the site lead to see a summary of any overnight alerts first thing in the morning, before the day shift starts.
Queues across a group of shops
A retailer with shops in several UK towns wants to know when till queues build up and how that changes through the week. They ask for queue alerts to each store manager during trading hours and a weekly comparison of footfall and queue times for the area managers, all from cameras already over the tills. Nothing new needs fitting on the shop floor.
Gloves and hairnets in food prep
A central kitchen preparing meals for UK restaurants wants staff on the prep line to wear hairnets and gloves at all times. They want a custom rule built on their own footage, tested in a pilot, then live alerts to the kitchen supervisor and a daily summary for the food safety manager, so patterns across shifts become easy to spot.
Use case questions from UK businesses
What can CamAI detect on UK sites today?
Built in: fire and smoke; intrusion, restricted zones and after-hours entry with a saved clip; loitering and suspicious behaviour; helmets and high-visibility vests; people counting, heatmaps and dwell time; queue alerts; and anonymous aggregate age and gender estimates. Anything beyond that, such as hairnets, gloves, uniforms, wristbands, unattended counters or crowding at a ride, is set up as a custom rule and tested on your footage first.
Our use case is unusual. Can CamAI still help?
Quite possibly. Tell our UK team what you want your cameras to notice and where. If it is something CamAI can be trained to spot, we build it as a custom rule and test it on your own footage during the pilot. If the pilot shows it does not work reliably on your cameras, you will know before you commit to anything, and we will say so plainly. Sometimes a small change to a camera angle is all it takes.
Can one camera handle more than one use case?
Yes, as long as the view suits each rule. A camera over a warehouse dock could check hi-vis vests during shifts and watch for intrusion at night. A shop entrance camera could count visitors during trading hours and flag after-hours entry once the store has closed. Our UK team checks each camera during the site visit and suggests which rules it can carry, and where a second camera would help.
How do alerts reach the right people?
Each rule can be sent to different people through different channels: the CamAI mobile app, WhatsApp, SMS, email or Telegram. A PPE alert might go to the shift supervisor's app, a smoke alert to the key holder on WhatsApp, and a weekly summary to the operations director by email. Every alert carries the camera name, the time and a short clip, and you can change who gets what at any time.
Where is our video analysed?
Usually on a CamAI server installed at your premises. The video is analysed in the same building where it is recorded, so footage does not need to be sent to the cloud for an alert to be raised. What leaves the site is the alert itself, with its short clip, plus the counts and summaries shown in the dashboard and reports. Your recorder keeps the full recordings, just as it does today.
How does a UK business get started?
Start with a site visit from our UK team, who look at your cameras, network and the use cases that matter most to you. Next comes a pilot on a few of your own cameras, including any custom rules, so you see real alerts. Then you receive a written proposal, quoted per site, with scope, timeline and cost. There is no fixed price list, because every site, camera layout and set of rules is different.
Tell us what your team needs to catch.
Leave your number and we’ll call you, or book a site visit to plan the rules on your cameras.
What happens next
- 1Our team contacts you to arrange a visit to your site.
- 2We look at your cameras and agree the rules with your team.
- 3A pilot on a few of your cameras, then a written proposal.