CamAI

AI CCTV for UK warehouses and factory floors

CamAI gives UK warehouses and factories alerts for missing helmets and hi-vis vests, people in restricted zones, smoke and after-hours entry, all from the IP cameras already watching the site.

Sectors

AlertsWarehouse · sample
  1. 14:32

    No helmet · zone B

    CAM 07Built-in

    Clip
  2. 15:08

    Person in forklift lane

    CAM 11Built-in

    Clip
  3. 02:14

    Smoke · loading bay 3

    CAM 04Built-in

    Clip
Example · sample times and events
A warehouse aisle with racking and staff in high-visibility vests

The cameras are there. The problem is what nobody sees.

The problem, in one line

A supervisor can’t be in every aisle on every shift.

  1. PPE slips when nobody is looking

  2. Near misses leave no record

  3. Night shifts and weekends are quiet

Rules that fit how your site runs.

Built-in

  • Helmet or high-visibility vest missing

  • Person in a forklift lane or loading-bay zone

  • Entry to a restricted store or plant room

  • Smoke or fire in racking and loading bays

Custom rules are built and tested on your own footage before go-live.

Book a site visit

Inside this sector. What CamAI can flag at each kind of site.

Built-in rules start on day one; anything marked custom is built and tested on your own footage in the pilot.

Warehouse and factory camera alerts in the UK

A UK distribution centre or plant can have cameras on every dock, aisle and yard, yet nobody has time to watch them during a busy shift.

How UK warehouses and factories use CamAI

A UK distribution centre or plant can have cameras on every dock, aisle and yard, yet nobody has time to watch them during a busy shift. CamAI watches for the rules that matter on your site and sends the clip to the supervisor who can act.

  • Who uses it on UK sites

    Warehouse managers, plant managers, health and safety officers and logistics operations leads. They search for AI camera alerts for warehouses in the UK, hi-vis detection or PPE cameras for factories. Their sites mix people, forklifts and machinery, often with agency staff and visitors, and they want rule breaks spotted during the shift rather than discovered later.

  • PPE and restricted zones

    Helmets and high-visibility vests are checked out of the box in the zones you draw, such as loading docks, racking aisles or the production hall. Restricted-zone alerts flag anyone walking into an area near machinery, a pedestrian-free route or a hazardous store. Each alert carries the camera, the time and a short clip for the supervisor.

  • Nights, weekends and shutdowns

    When the site is quiet, intrusion and after-hours rules watch the yard, gates, docks and stores, and smoke and fire alerts cover charging areas, compactor bays and stock. Alerts go to the on-call supervisor or key holder by app, WhatsApp, SMS, email or Telegram, so someone sees the clip while it still matters.

  • Our UK team, your network

    Our UK team walks the site with you, checks camera angles against the zones where rules apply and tunes each rule on your footage during the pilot. CamAI connects to IP cameras over RTSP or ONVIF and usually runs on a server on your premises, so the video is analysed on site and your recorder carries on as before.

  1. Agency staff on the docks

    You run a UK distribution centre that takes on agency staff at peak times. Hi-vis vests are required on the loading docks, but new starters sometimes forget. You want the dock supervisor to get a clip on the app whenever someone steps into that zone without a vest.

  2. A pedestrian-free route

    A factory has a marked route where only forklifts may travel. The plant manager wants an alert whenever a person walks into it, plus a weekly report showing which cameras and shifts see the most entries, so the safety briefings can be targeted.

  3. A yard at the weekend

    A manufacturer closes from Friday evening to Monday morning. The operations lead wants alerts if anyone enters the yard or the finished goods store, and an alert if smoke appears near the battery charging area, all sent to the key holder on WhatsApp with the clip.

Questions from UK warehouses and factories

Which safety rules can CamAI check in a UK warehouse?

Helmets and high-visibility vests are built in, along with restricted zones, after-hours entry, smoke and fire, and loitering. Other rules, such as gloves, a specific uniform or a person in a forklift-only route, can be set up as custom rules and tested on your own footage during the pilot.

Can PPE rules apply only in some areas?

Yes. You draw zones on each camera image, and a rule only applies inside them. A vest rule might cover the docks and racking aisles but not the offices or canteen. Rules can also follow a schedule, for example only during shifts, so the site is not flooded with alerts.

Does it work with our warehouse CCTV?

Usually, yes. CamAI connects to IP cameras over RTSP or ONVIF, and your recorder stays in place. Large buildings and yards can make some views too distant for PPE checks, so our UK team reviews each camera during the site visit and tells you which rules it can support.

Who gets the alerts on a busy site?

You choose per rule and per zone. Many sites send PPE and zone alerts to the shift supervisor on the app, overnight alerts to the key holder on WhatsApp and a weekly summary to the health and safety lead by email. Each alert includes the camera, time and a short clip.

Is video from our site sent to the cloud?

Usually not. CamAI typically runs on a server on your premises, so the video is analysed where it is recorded. Only the alerts, with their clips, and the reports go to your team. The full footage stays on your recorder, and your network stays under your control.

How do we start, and what does it cost?

Our UK team visits the site, then runs a pilot on a few of your own cameras, including any custom rules. You see real alerts from your own docks and floors before deciding. A written proposal follows, quoted per site, with scope, timeline and cost.

Put a safety lead in every aisle.

Book a site visit. We map your PPE zones and lanes and plan a pilot.

What happens next

  1. 1Our team contacts you to arrange a visit to your site.
  2. 2We look at your cameras and agree the rules with your team.
  3. 3A pilot on a few of your cameras, then a written proposal.

Prefer WhatsApp? Chat with us

For example: helmets in the warehouse, smoke at night, queues at the tills.

We use these details only to arrange your site visit and pilot.

Book a site visit