
Fire and smoke detection cameras For sites across Pakistan
CamAI safety alerts watch your existing cameras in Lahore, Karachi or Islamabad for smoke, fire and people where they should not be. For warehouses, factories, shops and kitchens.
Smoke detected
- Site
- Warehouse · Bay 2
- Camera
- CAM 12
- Time
- 02:14
- Sent to
- Night duty team
Clip saved

Four safety alerts, switched on per camera.
01
Fire & smoke
Spots flame and smoke in the camera view and alerts your team with the clip.
02
Intrusion & after-hours entry
Draw a line or an area. Get an alert when someone crosses it during the hours you set.
03
Restricted zones
Mark the areas only authorised staff should enter, on each camera, for the hours that matter.
04
Suspicious behaviour
Flags loitering and unusual time spent near high-value shelves or doors.
Your video stays at your site
Usually analysed on a server at your premises. Camera video stays in Pakistan. CamAI does not identify anyone.
Privacy and your dataStart with one site
A pilot on your own cameras and footage, so you see real alerts before you decide. Pricing is by quote.
How the pilot worksSafety alerts in Pakistan
Fires and break-ins rarely happen while a manager is standing in front of the CCTV monitor.
Safety alerts at sites in Pakistan
Fires and break-ins rarely happen while a manager is standing in front of the CCTV monitor. They happen at night, on holidays or in a corner nobody checks. CamAI is set up to notice them on your existing cameras and tell the person on duty, with a short video, so they can decide what to do.
Smoke and flames
CamAI looks for visible smoke and flames in camera view, in stockrooms, loading bays, kitchens and production halls. It does not replace your fire alarm or your fire safety team; it adds eyes on areas that may be empty at the time. The message says which camera saw it and when, with a short recording to confirm.
Restricted zones and after-hours entry
You mark the areas that should stay empty, such as a cash office, a chemical store or the yard behind a warehouse, and the hours they should stay empty. If someone walks in, CamAI saves a recording of the entry and sends it out. This suits night shifts and long public holidays, when a site in Pakistan can stand empty for days.
Loitering near doors and fences
Some risks start with someone hanging around. CamAI can flag a person who stays too long near a gate, a back door or a parked delivery truck. The guard gets the video and can go and look, rather than learning about it the next day from the recorder. You set how long counts as too long for each spot.
Who receives safety alerts
You pick the people and the channel. A guard in Islamabad might get WhatsApp at night, the site manager an SMS, and head office an email summary. Times can differ by rule, so a smoke alert can go to everyone around the clock while after-hours entry goes only to security.
A Lahore factory over the weekend
Your factory in Lahore closes on Sunday, but stock and machines stay inside. You want to know if smoke appears in a hall or if anyone climbs over the back wall, and you want the person on call to get the video on WhatsApp straight away.
A Karachi warehouse with open bays
Your Karachi warehouse leaves loading bays open late for trucks. You want an alert if someone lingers by the bay doors after the last delivery, and a saved recording if anyone walks into the bonded area outside working hours, so the night supervisor can check.
A restaurant kitchen in Islamabad
Your restaurant in Islamabad closes late and the kitchen is empty for hours. You want CamAI to watch the cooking line and the gas store for smoke overnight and tell the manager on duty, with the video, if anything shows up.
Safety alert questions from Pakistan
Does CamAI replace our fire alarm?
No. Keep your fire alarm, extinguishers and safety procedures as they are. CamAI adds a camera-based check for smoke and flames in the areas it can see, and sends the video to the people you name. It is an extra layer on top of what your site in Pakistan already has, not a substitute.
Can it tell staff from intruders at night?
CamAI does not know who a person is. It flags any person in a zone during the hours you mark as closed. That is why the rule is shaped around your schedule: if cleaners work late in one area, we leave that area or those hours out, so alerts focus on real after-hours entry.
Which areas should we cover first?
On the site visit in Lahore, Karachi or Islamabad we usually suggest the places that are empty at night and costly to lose: stockrooms, loading bays, server rooms, kitchens and perimeter gates. We then check whether the cameras there see clearly enough, including at night, before the pilot starts.
Do night cameras work with CamAI?
If your cameras have night vision or the area is lit, CamAI can work with those images. Very dark or badly angled views are harder for any system. We look at your night footage during the visit and tell you plainly which cameras are suitable and which might need light or a new angle.
How are safety alerts sent?
By WhatsApp, Telegram, SMS, email or the CamAI app. Each message names the camera and the time and carries a short video. Every event is also stored in the dashboard, so the morning team can review what happened overnight, and a scheduled report can sum up the week for owners.
What does it cost to add safety alerts?
We quote per site after a visit, and there is no list price. The figure depends on the cameras involved and the rules you need. You see the alerts working in a pilot on your own feeds before you receive a written proposal for the site.
Find out what your cameras see at night.
Book a site visit. We look at your cameras and plan safety rules for the places nobody is watching.
What happens next
- 1Our team contacts you to arrange a visit to your site.
- 2We look at your cameras and agree the rules with your team.
- 3A pilot on a few of your cameras, then a written proposal.